Computer Science is a science of abstraction -creating the right model for a problem and devising the appropriate mechanizable techniques to solve it

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install libxt-dev

cd ns
./configure
make
sudo make install

33 Responses to Updated: NS-2.33 and HWMP rev 183 on Intrepid Ibex 8.10

1. Pages:
2. 1
3. 2
4. 3
5. »

1. vanillabean00 says:

   February 16, 2009 at 7:33 pm

   when run %ns , what is the output?
   Is it % or
   Usage: host [-v] [-a] [-t querytype] [options] name [server]
   Listing: host [-v] [-a] [-t querytype] [options] -l zone [server]
   Hostcount: host [-v] [options] -H [-D] [-E] [-G] zone
   Check soa: host [-v] [options] -C zone
   Addrcheck: host [-v] [options] -A host
   Listing options: [-L level] [-S] [-A] [-p] [-P prefserver] [-N skipzone]
   Common options: [-d] [-f|-F file] [-I chars] [-i|-n] [-q] [-Q] [-T] [-Z]
   Other options: [-c class] [-e] [-m] [-o] [-r] [-R] [-s secs] [-u] [-w]
   Special options: [-O srcaddr] [-j minport] [-J maxport]
   Extended usage: [-x [name ...]] [-X server [name ...]]

   Reply
   • Jason Ernst says:

     February 16, 2009 at 7:39 pm

     I always get % for the output when no filename or parameters are specified with it

     Reply
2. Mei rui says:

   February 19, 2009 at 2:47 am

   hello,I want simulate HWMP protocol for my paper,and my improved HWMP protocl run in hibrid mode which is :source forward the first data packet on the proactive path toward the Root MP,when destination recieve the dada,then initiate RA-AODV process to create the route to source, not just only proactive mode or reactive mode,so how to do it next?thanks

   Reply
   • Jason Ernst says:

     February 19, 2009 at 8:02 am

     I’m not sure I understand completely what you are asking. I am fairly new at working with HWMP so I may not be much help to you. You would probably have better luck contacting the people who made the hwmp implementation for ns2. See http://hippo.mipt.ru/hwmp/

     Reply
3. Mei rui says:

   February 20, 2009 at 2:40 am

   Thanke you ,are you familar with opnet11.5 or Qualnet4.5 for HWMP simulation ?

   Reply
   • Jason Ernst says:

     February 20, 2009 at 8:48 am

     No not yet sorry, I have only really worked with ns2 and some custom c/c++ simulators I have wrote myself for my research. I haven’t really ventured into hwmp much yet.

     Reply
4. Banthena says:

   June 15, 2009 at 11:54 pm

   Hey Jason,

   You have been very instrumental to me in fixing ns-2 problems in the past and I hope you can help me out this time too. I am struggling to fix DYMOUM in ns-2.33. Patches are available for previous versions of ns but not ns-2.33. I tried using ns-2.29 patch on ns-2.33 but again there are so many dependencies within and I cannot really figure out what has to be changed. Please suggest how I can fix this. I downloaded this package from ” http://masimum.dif.um.es/?Software:DYMOUM:Installation “.

   Thank you,
   banthena

   Reply
5. andrei says:

   June 20, 2009 at 4:45 pm

   Hello, can you help me with a new link for HWMP routing protocol extension for ns2. It seems that the russian site is down.
   I need it for my thesis.

   Thanks!

   Reply
6. peter says:

   July 8, 2009 at 5:39 am

   Hello,

   can you put a new link for HWMP. i cant dowload it from this site http://hippo.mipt.ru/hwmp/ns-2.33_hwmp_rev183.tar.bz2, ist mayve down.

   thanks

   Reply
7. geajy says:

   July 14, 2009 at 2:35 am

   Hello, our group have implemented the whole mesh networking in ns-2.

   Maybe who wants can download from our group site: http://wireless.ustc.edu.cn/wngwiki/Resources

   It is tested very well in NS2.30, and many tips are included:
   1. IEEE802.11s architecture supporting including three types mesh nodes (MAP, MPP, Pure MP)
   2. Two layer routing protocol based on IEEE802.11s architcture

   * HWMP routing protocol (s-aodv and routing protocol) with mesh portal selection mechanism
   * Multi-gateway and multi-path routing protocol

   3. Multi-interface and multi-channel supporting including IEEE802.11a/g
   4. Handoff in wireless mesh network including inner-Mesh handoff and inter-Mesh handoff
   5. Link metric caculating, including etx, ett, air-time, hop.

   Besides, the upper HWMP is implemented in the layer-3 just as aodv. However, I think as it is shown in IEEE 802.11s, HWMP is a layer-2 routing.

   Reply
8. umang says:

   September 10, 2009 at 9:34 am

   hi,
   please tell me…from where i can install dymoum patch for ns-2.33.
   regards
   Umang

   Reply
   • Jason Ernst says:

     September 12, 2009 at 10:58 am

     Hi umang, I’m not actually familiar with that particular patch, your best bet will be to try the ns2 mailing list or website

     Reply
9. beth says:

   October 8, 2009 at 7:31 am

   May I have another link where I can download the HWMP. This link above is not working. If anyone has it please may you upload it on http://www.sendspace.com

   Thank you

   Reply
10. beth says:

    October 8, 2009 at 8:48 am

    May I have another link where I can download the HWMP. This link above is not working. If anyone has it please may you upload it on http://www.sendspace.com

    Reply

1. Pages:
2. 1
3. 2
4. 3
5. »